Improving the Quality of Small Pieces Made by Rapid Prototyping

  • Răzvan Sebastian Crăciun „Dunărea de Jos” University of Galați, Department of Manufacturing Engineering
  • Georgiana Alexandra Moroșanu „Dunărea de Jos” University of Galați, Department of Manufacturing Engineering
  • Virgil Gabriel Teodor „Dunărea de Jos” University of Galați, Department of Manufacturing Engineering
DOI: https://doi.org/10.35219/tmb.2021.1.03
Keywords: rapid prototyping, samples, 3D printing

Abstract

Rapid Prototyping is the rapid fabrication of a part, model, or physical assembly that was designed using any design software (Autodesk Inventor Professional in this case), which is a CAD (Computer-Aided Design) application that helps in the creation of a digital prototype. The creation of the part, model, or assembly is usually completed using the manufacture of additives or more commonly known as 3D printing. The paper presents a 3D design, 3D printing, and verifying the actual dimensions of the printed „washer”. The purpose of this paper is to verify that printing errors are controllable and can be reduced. The paper contains and explains all the mandatory steps required to do this experiment and the laboratory equipment that was used to do this.

Published
2022-01-17
How to Cite
1.
Crăciun R, Moroșanu G, Teodor V. Improving the Quality of Small Pieces Made by Rapid Prototyping. Annals of ”Dunarea de Jos” University of Galati, Fascicle V, Technologies in machine building [Internet]. 17Jan.2022 [cited 9May2024];39(1):19-4. Available from: https://www.gup.ugal.ro/ugaljournals/index.php/tmb/article/view/5007
Issue
Vol 39 No 1 (2021): Vol 39 (2021)
Section
Articles

Most read articles by the same author(s)

Obs.: This plugin requires at least one statistics/report plugin to be enabled. If your statistics plugins provide more than one metric then please also select a main metric on the admin's site settings page and/or on the journal manager's settings pages.