Metallurgical and Corrosion Property of Additive Manufactured Titanium Alloy-Ti6Al4V

  • R. M. Mahamood Department of Mechanical Engineering Science, University of Johannesburg, Auckland park 2006, South Africa & Department of Materials and Metallurgical Engineering, University of Ilorin, Nigeria
  • T. Marvins Department of Materials and Metallurgical Engineering, University of Ilorin, Nigeria
  • K. O. Abdulrahman Department of Materials and Mechanical Engineering, University of Ilorin, Nigeria
  • Y. L. Shuaib-Babata Department of Materials and Metallurgical Engineering, University of Ilorin, Nigeria
  • J. A. Adebisi Department of Materials and Metallurgical Engineering, University of Ilorin, Nigeria
  • S. A. Akinlabi Department of Mechanical Engineering, Butterworth Campus, Walter Sisulu University
  • S. Hassan Department of Mechanical Engineering, Butterworth Campus, Walter Sisulu University
  • E. T. Akinlabi Department of Mechanical Engineering Science, University of Johannesburg, Auckland park 2006, South Africa
DOI: https://doi.org/10.35219/awet.2020.06

Abstract

Additive manufacturing (AM) is an important manufacturing technology that has changed the way products are designed and manufactured. Laser Metal Deposition (LMD), an AM technology, has the capability of producing components using a 3-Dimensional CAD model, through a layer by layer formation process just like any other AM technology. In this study, the influence of the scanning speed on the corrosion property of Titanium alloy-Ti6Al4V using LMD process was investigated. The scanning speed varied between 0.02 m/s and 0.14 m/s while other processing parameters were kept constant. The electrochemical corrosion test was conducted in sodium chloride (NaCl) solution. The result revealed that the corrosion resistance property was found to increase with  the scanning speed.

Downloads

Download data is not yet available.

Author Biography

R. M. Mahamood, Department of Mechanical Engineering Science, University of Johannesburg, Auckland park 2006, South Africa & Department of Materials and Metallurgical Engineering, University of Ilorin, Nigeria

Department of Mechanical Engineering Science, University of Johannesburg, Auckland park 2006, South Africa & Department of Materials and Metallurgical Engineering, University of Ilorin, Nigeria

Published
2020-12-21
How to Cite
Issue
Vol 31 (2020)
Section
Articles

Papers accepted for publication become the copyrighted property of the Annals of "Dunarea de Jos" University of Galati, Fascicle XII, Welding Equipment and Technology. No part of the publication may be reproduced or transmitted in any form, or by any means, electronic or mechanical, including photocopy, recording, or any information storage and retrieval system, except in limited quantities for the non-commercial purposes of scientific or educational advancement, without permission in writing from the Editorial Board.

Most read articles by the same author(s)