Numerical analysis of the stress state in a plating floor for a 8000 tdw chemical tanker
Keywords:
finite element method, hydrostatic water pressure, , mechanical structural, stress calculation.
Abstract
The analysis has the purpose to determine the stresses that will occur in the structure un-der unfavorable conditions. Depending on the results, intervention will be made upon the structure to ensure the resistance of the vessel, optimizing of the elements of the framing system in the areas where the maximum allowable stresses are exceeded. The analysis will be performed on a cargo tank, for three static stress cases, the vessel be-ing placed on still water, on sagging and hogging.
Downloads
Download data is not yet available.
References
[1] Cook, R. D., Finite Element Modeling for Stress Analysis, Wiley, New York, 1995.
[2] Cristea A.G., Contribuții privind optimizarea structurilor de navă, Teză de doctorat, Galați, 2014
[3] Jonathan Whiteley, Finite Element Methods, Ed. Springer International Publishing AG, 2007
[4] x x x – Siemens PLM Software Inc., „FNN, Femap/NX Nastran users’ manual,” 2020
[5] x x x – DNV GL, Part 3, Chapter 7, Section 3, 2021
[6] x x x – DNV, Poseidon User Manual, v.21.4
[7] x x x – DNV rules for classification, Ships (RU-SHIP), https://www.dnvgl.com/rules-standards/
[8]x x x – „Common Structural Rules for Bulk Carriers and Oil Tankers”, 1 Jan. 2020
[9]http://www.iacs.org.uk/publications/common-structural-rules/csr-for-bulk-carriers-and-oil-tankers/
[10] http://www.imo.org/en/OurWork/Safety/Cargoes/CargoesInBulk/Pages/IBC-Code.aspx
[11] x x x – FEMAP 12.0.1a / NX NASTRAN User’s Guide, UGS Corporation / Siemens PLM Software Inc., 2021
[2] Cristea A.G., Contribuții privind optimizarea structurilor de navă, Teză de doctorat, Galați, 2014
[3] Jonathan Whiteley, Finite Element Methods, Ed. Springer International Publishing AG, 2007
[4] x x x – Siemens PLM Software Inc., „FNN, Femap/NX Nastran users’ manual,” 2020
[5] x x x – DNV GL, Part 3, Chapter 7, Section 3, 2021
[6] x x x – DNV, Poseidon User Manual, v.21.4
[7] x x x – DNV rules for classification, Ships (RU-SHIP), https://www.dnvgl.com/rules-standards/
[8]x x x – „Common Structural Rules for Bulk Carriers and Oil Tankers”, 1 Jan. 2020
[9]http://www.iacs.org.uk/publications/common-structural-rules/csr-for-bulk-carriers-and-oil-tankers/
[10] http://www.imo.org/en/OurWork/Safety/Cargoes/CargoesInBulk/Pages/IBC-Code.aspx
[11] x x x – FEMAP 12.0.1a / NX NASTRAN User’s Guide, UGS Corporation / Siemens PLM Software Inc., 2021
Published
2022-12-03
How to Cite
1.
Năstasă A, Cristea A. Numerical analysis of the stress state in a plating floor for a 8000 tdw chemical tanker. Annals of ”Dunarea de Jos” University of Galati. Fascicle XI Shipbuilding [Internet]. 3Dec.2022 [cited 18Sep.2024];45:107-12. Available from: https://www.gup.ugal.ro/ugaljournals/index.php/fanship/article/view/5564
Issue
Section
Articles
