Calculation of the Deposited Layer Thickness Through Side Injection of Powder Using CO2 Laser
Keywords:
laser deposition by powder injection into the molten bath, determination of coat characteristics, influence of injected particles
Abstract
The paper presents a simplified theoretical model for estimating the operating parameters of the laser deposition by injecting the powder into the metal bath. The study considered the influence of the powder particles on the transfer of energy from the laser beam to the surface of the substrate to be deposited. The following parameters were determined: the metal bath depth, the diameter of the metal bath, the mass of the powder deposited, the average temperature of the metal bath, the thickness of the deposited layer.
References
[1]. Medres B., Bamberger M., Shepeleva L., Mathematical modeling for laser treatment processes, Surface Technologies Ltd. Israel.
[2]. Medres B., Thermal and plasma phenomena in laser hardening and alloying of toolsteels, Moscow, IMET, p. 284, 1989.
[3]. Bokren C., Huffman D., Absorption and scattering of light by small particles, John Wiley, p. 246, 1983.
[4]. Schneider M. F., Laser cladding with powder, Ph. D. Thesis University of Twente, Enschede, Olanda, 1998.
[5]. Vollertsen F., Partes K., Meijer J., State of the art of Laser Hardening and Cladding, Proceedings of the Third International WLT – Conference on Lasers in Manufacturing 2005, Munich, june 2005.
[6]. Levcovici S., Levcovici D. T., Gheorghieş C., Boiciuc S., Laser Cladding of Ni-Cr-B-Fe-Al Alloy on a Steel Support, The International Thermal Spray Conference and Exposition (ITSC), p. 1339-1344, Seattle, USA, May 15th-17th 2006.
[7]. Levcovici D. T., Boiciuc R., Levcovici S. M., Gheorhieş C., Laser cladding of M2 steel on a steel substrate, The International Thermal Spray Conference and Exposition (ITSC), p. 1333-1338, Seattle, USA, May 15th -17th 2006.
[2]. Medres B., Thermal and plasma phenomena in laser hardening and alloying of toolsteels, Moscow, IMET, p. 284, 1989.
[3]. Bokren C., Huffman D., Absorption and scattering of light by small particles, John Wiley, p. 246, 1983.
[4]. Schneider M. F., Laser cladding with powder, Ph. D. Thesis University of Twente, Enschede, Olanda, 1998.
[5]. Vollertsen F., Partes K., Meijer J., State of the art of Laser Hardening and Cladding, Proceedings of the Third International WLT – Conference on Lasers in Manufacturing 2005, Munich, june 2005.
[6]. Levcovici S., Levcovici D. T., Gheorghieş C., Boiciuc S., Laser Cladding of Ni-Cr-B-Fe-Al Alloy on a Steel Support, The International Thermal Spray Conference and Exposition (ITSC), p. 1339-1344, Seattle, USA, May 15th-17th 2006.
[7]. Levcovici D. T., Boiciuc R., Levcovici S. M., Gheorhieş C., Laser cladding of M2 steel on a steel substrate, The International Thermal Spray Conference and Exposition (ITSC), p. 1333-1338, Seattle, USA, May 15th -17th 2006.
Published
2017-06-15
How to Cite
1.
BOICIUC S, ALEXANDRU P. Calculation of the Deposited Layer Thickness Through Side Injection of Powder Using CO2 Laser. The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science [Internet]. 15Jun.2017 [cited 24Apr.2024];40(2):34-9. Available from: https://www.gup.ugal.ro/ugaljournals/index.php/mms/article/view/1163
Issue
Section
Articles
