Obtaining and Tensile Strength Study for Non-Precious Alloys Based Cobalt
Keywords:
non-precious alloys, medical applications, casting, electrical discharge
Abstract
This paper presents aspects of obtaining non-precious dental alloys of Co-Cr-Mo alloys system and experimental tests to determine tensile strength, carried on standard flat specimens.
References
[1]. Alsaran A., Bayrak O., Celik A., Kaymaz, A. F. Yetim - Surf. Coat. Technol., 2008, 202, p. 2433.
[2]. Blatter A., Eschler Luthy H. P. Y., Reclaru L., Susz C. - Biomaterials, 26, 2005, p. 4358-4365.
[3]. Ghiban B. - Structural aspects of cobalt-base alloys for biomedical implants, Ovidius University Annals of Mechanical Engineering, vol. 3, nr. 3, 2001.
[4]. Bugliosi S., Faga M. G., Maina G., Spriano S., Verne E. - Surface treatment on an implant cobalt alloy for high biocompatibility and wear resistance, Wear 259, 2005, p. 919-925.
[5]. Craig R. G., Powers J. M. - Restorative Dental Materials, 11thed. Mosby, 2002, p. 480-492.
[6]. Burny F., Donkerwolcke M., Muster D. - Biomaterials education: a challenge for medicine and industry in the late 1990s, Mater. Sci. Eng. A 199, 1995, p. 53-59.
[7]. Castano O., Michiardi A., Navarro M., Planell J. A. - Biomaterials in orthopaedics, J. R. Soc. Interface 5, 2008, p. 1137-1158.
[8]. Chen Y., Hsu R. W., Huang C., Yang C. - Electrochemical corrosion studies on Co–Cr–Mo implant alloys, Mater. Chem. Phys. 93, 2005, p. 531-538.
[9]. Dowson D., Neville A., Yan Y. - Tribology International, 40 2007, p. 1492.
[10]. Devine T. M., Wulff J. - Journal of Biomedical Materials Research 9, 1975, p. 151.
[11]. ***, www.eramet.ro.
[12]. Geantă V., Voiculescu I., Ştefănoiu R., Chiriţă I. - Obtaining and Characterization of Biocompatible Co-Cr as Cast Alloys, Key Engineering Materials vol. 583, 2014, Trans Tech Publications, Switzerland, p. 16-21.
[13]. B. Avitzur, Metals Forming: Processes and Analysis, R. E. Krieger Publishing Company, Huntington, New York, 1979.
[14]. L. Zaharia, R. Chelariu, R. Comaneci - Multiple direct extrusion: A new technique in grain refinement, Materials Science and Engineering: A, vol. 550, 30 July 2012, p. 293-299.
[15]. L. Zaharia, R. Comaneci, R. Chelariu, D. Luca - A new severe plastic deformation method by repetitive extrusion and upsetting, Materials Science and Engineering, vol. 595, 10 February 2014, p. 135-142.
[2]. Blatter A., Eschler Luthy H. P. Y., Reclaru L., Susz C. - Biomaterials, 26, 2005, p. 4358-4365.
[3]. Ghiban B. - Structural aspects of cobalt-base alloys for biomedical implants, Ovidius University Annals of Mechanical Engineering, vol. 3, nr. 3, 2001.
[4]. Bugliosi S., Faga M. G., Maina G., Spriano S., Verne E. - Surface treatment on an implant cobalt alloy for high biocompatibility and wear resistance, Wear 259, 2005, p. 919-925.
[5]. Craig R. G., Powers J. M. - Restorative Dental Materials, 11thed. Mosby, 2002, p. 480-492.
[6]. Burny F., Donkerwolcke M., Muster D. - Biomaterials education: a challenge for medicine and industry in the late 1990s, Mater. Sci. Eng. A 199, 1995, p. 53-59.
[7]. Castano O., Michiardi A., Navarro M., Planell J. A. - Biomaterials in orthopaedics, J. R. Soc. Interface 5, 2008, p. 1137-1158.
[8]. Chen Y., Hsu R. W., Huang C., Yang C. - Electrochemical corrosion studies on Co–Cr–Mo implant alloys, Mater. Chem. Phys. 93, 2005, p. 531-538.
[9]. Dowson D., Neville A., Yan Y. - Tribology International, 40 2007, p. 1492.
[10]. Devine T. M., Wulff J. - Journal of Biomedical Materials Research 9, 1975, p. 151.
[11]. ***, www.eramet.ro.
[12]. Geantă V., Voiculescu I., Ştefănoiu R., Chiriţă I. - Obtaining and Characterization of Biocompatible Co-Cr as Cast Alloys, Key Engineering Materials vol. 583, 2014, Trans Tech Publications, Switzerland, p. 16-21.
[13]. B. Avitzur, Metals Forming: Processes and Analysis, R. E. Krieger Publishing Company, Huntington, New York, 1979.
[14]. L. Zaharia, R. Chelariu, R. Comaneci - Multiple direct extrusion: A new technique in grain refinement, Materials Science and Engineering: A, vol. 550, 30 July 2012, p. 293-299.
[15]. L. Zaharia, R. Comaneci, R. Chelariu, D. Luca - A new severe plastic deformation method by repetitive extrusion and upsetting, Materials Science and Engineering, vol. 595, 10 February 2014, p. 135-142.
Published
2014-06-15
How to Cite
1.
MINCIUNĂ M, VIZUREANU P, ACHIŢEI D, GOANȚĂ V, TOMA Ștefan, BĂLȚATU M. Obtaining and Tensile Strength Study for Non-Precious Alloys Based Cobalt. The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science [Internet]. 15Jun.2014 [cited 3May2024];37(2):29-4. Available from: https://www.gup.ugal.ro/ugaljournals/index.php/mms/article/view/2445
Issue
Section
Articles
