Behavior of Cold Rolling Emulsions in the Obtaining Process of Steel Strips
Abstract
The research was focused on determining an optimum rolling emulsion to be used on a cold rolling mill from Galfinband Galati Romania. In this plant are obtained steel strips with the thickness of 0.7-0.8 mm. The main parameters depending on which the performance of a lubricant varies were determined. These were: viscosity, pH, thickness of lubrificant film, size of emulsion particles and their distribution on the surface of the steel band, oil content in the lubricating emulsion, usage degree of emulsion, applying method. The characteristics of mineral oil, fresh and recirculated emulsions have been analysed and discussed. Also by macroscopy were analyzed the form of contaminants on the surface of the steel bands which originate from lubricating emulsion. Their appearance is analyzed in the report with their generating processes and the quality of the emulsion.
Downloads
References
[2]. Cazimirovici, E. - Teoria deformării plastice, Editura tehnică Bucureşti, 1981.
[3]. *** - Elemente de teoria deformării plastice. Note de curs, http://www.ipm.utcluj.ro/Files/Curs_3_MDPR.pdf.
[4]. P Pathak, SK Jha, AP Singh - Tribological approach for improvement in productivity and quality of flat rolled steel products: a review, International Journal of Technical Research(IJTR), Vol 1, Issue 1, Mar-Apr 2012.
[5]. J. A. Schey - Tribology in metalworking – friction, Lubrication and Wear, American Society for Metals, Ohio, 1983.
[6]. K. Hyunok, K. Nimet - Friction and lubrication, Sheet Metal Forming—Fundamentals 2012 ASM International, www.asminternational.org adica din 05340G_Sample.
[7]. R. J. Pillar - Influence of rolling oil decomposition deposits on the quality of 55al-43.4zn-1.6si alloy coatings, http://theses.flinders.edu.au/uploads/approved/adtSFU20080108.132120/public/02chapter1.pdf.
[8]. J. P. Byers, Metalworking fluids, crc Press, 2006.
[9]. M. Raulf, T. Brixius, H. Duchaczek - Optimisation of rolling lubricants for improved operation of cold rolling mills (optilub), 2009, kina24031ens_002%20(10).pdf.
[10]. S. R. Schmid, W. D. Wilson - Lubrification mechanisms for oil-in-water emulsions, Lubrification Engineering, volume 52, 2, pp.168-175, 1996.
