Comparison of the Efficiency of Three Types of Solar Collectors
Keywords:
heat transfer, solar collector, solar energy, system efficiency, thermal performance
Abstract
Solar energy is one of the most abundant resources energy available in the world. Solar collectors have evolved in the last decades, but still they haven’t reached very high efficiencies.
The collector efficiency is dependent on the temperature of the plate which in turn is dependent on the nature of the fluid flow inside tube, solar isolation, ambient temperature and top loss coefficient, the emissivity of the plate and glass cover. This paper presents the test results of three different solar collectors and compares their efficiency.
Downloads
Download data is not yet available.
References
[1]. Aldo Steinfeld, Robert Palumbo. - Solar Thermochemical Process Technology, R. A. Meyers Ed., Academic Press, Vol. 15, pages 237-256, (2001).
[2]. Iuliana Burda, Constantin Neaga - Analiza eficientei termice a unor tipuri constructive de captatoare solare destinate incalzirii apei. Universitatea Politehnica Bucuresti 25 June, (2010).
[3]. Rakesh Kumar, Marc A. Rosen - Integrated collectorstorage solar water heater with extended storage unit. Applied Thermal Engineering, Volume 31, Issues 2-3, February, (2011), Pages 348-354.
[4]. *** ‐ Solar Energy Potential on the U.S. Continental Shelf http://ocsenergy.anl.gov, (2006).
[5]. Soteris A. Kalogirou - Solar thermal collectors and applications. Department of Mechanical Engineering, Higher Technical Institute, P.O. Box 20423, Nicosia 2152, Cyprus Received 18 June 2003; accepted 10 February, (2004).
[6]. Xu Xinjian, Yang Lei, Zhang Xiaosong and Peng Donggen - Review on the development of flat-plate solar collector and its building-integrated designing. School of Energy & Environment Southeast University Nanjing, 210096, China rachpe@seu.edu.cn.
[2]. Iuliana Burda, Constantin Neaga - Analiza eficientei termice a unor tipuri constructive de captatoare solare destinate incalzirii apei. Universitatea Politehnica Bucuresti 25 June, (2010).
[3]. Rakesh Kumar, Marc A. Rosen - Integrated collectorstorage solar water heater with extended storage unit. Applied Thermal Engineering, Volume 31, Issues 2-3, February, (2011), Pages 348-354.
[4]. *** ‐ Solar Energy Potential on the U.S. Continental Shelf http://ocsenergy.anl.gov, (2006).
[5]. Soteris A. Kalogirou - Solar thermal collectors and applications. Department of Mechanical Engineering, Higher Technical Institute, P.O. Box 20423, Nicosia 2152, Cyprus Received 18 June 2003; accepted 10 February, (2004).
[6]. Xu Xinjian, Yang Lei, Zhang Xiaosong and Peng Donggen - Review on the development of flat-plate solar collector and its building-integrated designing. School of Energy & Environment Southeast University Nanjing, 210096, China rachpe@seu.edu.cn.
Published
2012-09-15
How to Cite
1.
MOCANU CB, PANAIT T, TEODORU A, TASMA D. Comparison of the Efficiency of Three Types of Solar Collectors. The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science [Internet]. 15Sep.2012 [cited 4Oct.2024];35(3):63-6. Available from: https://www.gup.ugal.ro/ugaljournals/index.php/mms/article/view/2883
Issue
Section
Articles
