Waste Minimization by Reuse and Recycling
Keywords:
pollution prevention, waste minimization
Abstract
Recently, pollution prevention directs attention towards the elimination or reduction of undesired by- products within the production process itself before treatment. On the long term, pollution prevention through waste minimization and cleaner production is more cost-effective and environmentally sound than traditional pollution control methods.
The objective of this work was to carry out a feasibility study to define and implement an integrated pollution prevention and control measure in order to minimize waste and therefore to achieve compliance with the Romanian Environmental law.
References
[1]. Abbas Ghassemi - Handbook of Pollution Control and Waste Minimization, Marcel Dekker, Inc., New York, Basel, 2002.
[2]. Cheremisinoff N.P. - Handbook of solid waste management and waste minimization technologies, Butterworth-Heinemann, 2003.
[3]. Ebnesajjad S. - Surface Treatment of Materials for Adhesion Bonding, William Andrew Publishing, 2006.
[4]. Morselli L., Passarini F., Vassura I. - Innovation Techologies and Environmental Impacts in Waste Management, Lectures of the Summer School Rimini, Italy, 12-17 June, 2006.
[5]. Negoiţă D.L. - Contribuţii la reducerea poluării provocate prin funcţionarea unui şantier naval (Studies on reduction of pollution caused by operation of a shipyard), PhD thesis, "Dunărea de Jos" University of Galaţi, 2007.
[6]. Nicolae M., et al. - Dezvoltare durabilă în siderurgie prin valorificarea materialelor secundare (Sustainable development in ferrous metallurgy by capitalization of secondary materials), Printech, Bucuresti, 2004.
[7]. Woodard F. - Industrial Waste Treatment Handbook, Butterworth–Heinemann, 2001.
[8]. ***, Best pollution prevention practices for abrasive blast media waste from shipyard repair activities, in Best Management Practices Manual for the Shipbuilding and Repair industry, The Commonwealth of Virginia State Water Control Board.
[9]. ***, Road and paving management technologies, ASTM., vol. 04.03.
[10]. ***, Eco-efficiency- creating more value with less impact, World Business Council for Sustainable Development, http://www.wbcsd.org.
[2]. Cheremisinoff N.P. - Handbook of solid waste management and waste minimization technologies, Butterworth-Heinemann, 2003.
[3]. Ebnesajjad S. - Surface Treatment of Materials for Adhesion Bonding, William Andrew Publishing, 2006.
[4]. Morselli L., Passarini F., Vassura I. - Innovation Techologies and Environmental Impacts in Waste Management, Lectures of the Summer School Rimini, Italy, 12-17 June, 2006.
[5]. Negoiţă D.L. - Contribuţii la reducerea poluării provocate prin funcţionarea unui şantier naval (Studies on reduction of pollution caused by operation of a shipyard), PhD thesis, "Dunărea de Jos" University of Galaţi, 2007.
[6]. Nicolae M., et al. - Dezvoltare durabilă în siderurgie prin valorificarea materialelor secundare (Sustainable development in ferrous metallurgy by capitalization of secondary materials), Printech, Bucuresti, 2004.
[7]. Woodard F. - Industrial Waste Treatment Handbook, Butterworth–Heinemann, 2001.
[8]. ***, Best pollution prevention practices for abrasive blast media waste from shipyard repair activities, in Best Management Practices Manual for the Shipbuilding and Repair industry, The Commonwealth of Virginia State Water Control Board.
[9]. ***, Road and paving management technologies, ASTM., vol. 04.03.
[10]. ***, Eco-efficiency- creating more value with less impact, World Business Council for Sustainable Development, http://www.wbcsd.org.
Published
2009-11-15
How to Cite
1.
NEGOITA DL, ION IV. Waste Minimization by Reuse and Recycling. The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science [Internet]. 15Nov.2009 [cited 1May2024];32(2):145-52. Available from: https://www.gup.ugal.ro/ugaljournals/index.php/mms/article/view/3055
Issue
Section
Articles
