Influence of Technological Parameters on the Evolution of Nickel Films Deposited by Electrolysis
Keywords:
nickel electrodeposition, current density, temperature, pH, Watts bath
Abstract
The influence of technological parameters on the structure of nickel layers electrodeposited on a copper substrate in a Watts bath has been studied. The complex influence of current densities, temperature and pH values on the formation of the deposition layers are compared. The surface morphology of the nickel films was analyzed by scanning electron microscopy (SEM) and atomic force microscopy (AFM). X-ray diffraction (XRD) was used to investigate the crystallinity of the prepared samples. The increase in the current density leads to fine crystallized films, while layers obtained at even higher current density have dendritic structures. The temperature increasing results in a structure change from fine to coarse.
Downloads
Download data is not yet available.
References
[1]. S. Kaja, H.W. Pickering and W.R. Bitler, Plat. Surf. Fin. 72 (1986) 58.
[2]. R. Winand, Hydrometallurgy, 29 (1992) 567.
[3]. R. Winand, Electrochim. Acta, 39 (1994) 1091.
[4]. R. Winand, J. Appl. Electrochem., 21 (1991) 377.
[5]. J.W. Dini, Electrodeposition: The Material Science of Coatings and Substrates, Noyes Publications, 1993.
[6]. J.W. Dini, Plat. Surf. Finish., 75 (1988) 11.
[7]. I. Bakony, E. Tóth-Kádár, L. Pogány, Á. Cziráki, I. Gerőcs, K. Varga-Josepovits, B. Arnold, K. Wetig, Surf. Coat. Tech., 78 (1996) 124.
[8]. Firoiu C., Tehnologia proceselor electrochimice, Editura Didactică şi Pedagogică, Bucureşti, 1983.
[9]. Oniciu, L., Grűnwald, E., Galvanotehnica, Editura Ştiinţifică şi Enciclopedică, Bucureşti, 1980.
[10]. di Bari G., Modern Electroplating, Fourth Edition, Edited by Mordechay Schlesinger and Milan Paunovic © 2000 John Wiley & Sons. Inc, New York, 2000.
[11]. A. Saraby-Reintjes, M. Fleischmann, Electrochim. Acta, 29 (1984) 557.
[12]. P. Allongue, L. Cagnon, C. Gomes, A. Gündel, V. Costa, Surf. Sci., 557 (2004) 41.
[13]. J. Amblard, M. Froment, G. Maurin, D. Mercier and E. Trevisan-Pickacz, Journal of Electroanalytical Chemistry, 134 (1982) 345.
[14]. E. Trevisan-Souteyrand, G. Maurin, D. Mercier, Journal of Electroanalytical Chemistry, 161 (1984) 17.
[15]. G. Maurin, Growth and Properties of Metal Clusters, (edited by J. Bourdon), Elsevier, Amsterdam, (1980), p. 101.
[16]. W. Schmickler, Interfacial Electrochemistry, OUP, Oxford, 1996.
[17]. R. Winand, Electrochim. Acta, 43 (1998) 2925.
[18]. H. Fischer, Electrodepos. Surf. Treat., 1 (3) (1973) 239.
[19]. F. Ebrahimi, Z. Ahmed, J. Appl. Electrochem., 33 (2003) 733.
[20]. K.L. Morgan, Z. Ahmed, F. Ebrahimi, Mat. Res. Soc. Symp. 634 (2001) Materials Research Society.
[21]. A.A. Rasmussen, P. Møller, M.A.J. Somers, Surf. Coat. Tech., 200 (2006) 6037.
[22]. Á. Cziráki, B. Fogarassy, I. Gerőcs, E. Tóth-Kádár, I. Bakony, J. Mater. Sci., 29 (1994) 4771.
[23]. I. Bakony, E. Tóth-Kádár, T. Tarnóczi, L.K. Varga, Á. Cziráki, I. Gerőcs, B. Fogarassy, Nonstr. Mater., 3 (1993) 155.
[24]. R. L. Zeller III, U. Landau, J. Electrochem. Soc., 137 (1990) 1107.
[25]. J. H. C. Cooper, D. B. Dreisinger and E. Peters, J. Appl. Electrochem., 25 (1995) 642.
[26]. C. Q. Cui, J. Y. Lee, Electrochim. Acta, 40 (1995) 1953.
[27]. V.S. Abdulin, V.I. Chernenko, Prot. Met. 18 (6) (1982) 777, (English translation of Zaschita Metallov).
[28]. R. Oriňáková, L. Trnková, M. Gálová, M. Šupicová, Electrochim. Acta, 49 (2004) 3587.
[29]. M. Šupicová, R. Rozik, L. Trnková, R. Oriňáková, M. Gálová, J. Solid State Electrochem., 10 (2006) 61.
[30]. J.O.M. Bockris, D. Drazic, A.R. Despic, Electrochim. Acta, 4 (1961) 325.
[31]. W.G. Proud, C. Müller, Electrochim. Acta, 38 (1993) 405.
[32]. I. Epelboin, M. Joussellin, R. Wiart, J. Electroanal. Chem., 119 (1981) 61.
[33]. E. Chassaing, M. Joussellin, R. Wiart, J. Electroanal. Chem., 157 (1983) 75.
[2]. R. Winand, Hydrometallurgy, 29 (1992) 567.
[3]. R. Winand, Electrochim. Acta, 39 (1994) 1091.
[4]. R. Winand, J. Appl. Electrochem., 21 (1991) 377.
[5]. J.W. Dini, Electrodeposition: The Material Science of Coatings and Substrates, Noyes Publications, 1993.
[6]. J.W. Dini, Plat. Surf. Finish., 75 (1988) 11.
[7]. I. Bakony, E. Tóth-Kádár, L. Pogány, Á. Cziráki, I. Gerőcs, K. Varga-Josepovits, B. Arnold, K. Wetig, Surf. Coat. Tech., 78 (1996) 124.
[8]. Firoiu C., Tehnologia proceselor electrochimice, Editura Didactică şi Pedagogică, Bucureşti, 1983.
[9]. Oniciu, L., Grűnwald, E., Galvanotehnica, Editura Ştiinţifică şi Enciclopedică, Bucureşti, 1980.
[10]. di Bari G., Modern Electroplating, Fourth Edition, Edited by Mordechay Schlesinger and Milan Paunovic © 2000 John Wiley & Sons. Inc, New York, 2000.
[11]. A. Saraby-Reintjes, M. Fleischmann, Electrochim. Acta, 29 (1984) 557.
[12]. P. Allongue, L. Cagnon, C. Gomes, A. Gündel, V. Costa, Surf. Sci., 557 (2004) 41.
[13]. J. Amblard, M. Froment, G. Maurin, D. Mercier and E. Trevisan-Pickacz, Journal of Electroanalytical Chemistry, 134 (1982) 345.
[14]. E. Trevisan-Souteyrand, G. Maurin, D. Mercier, Journal of Electroanalytical Chemistry, 161 (1984) 17.
[15]. G. Maurin, Growth and Properties of Metal Clusters, (edited by J. Bourdon), Elsevier, Amsterdam, (1980), p. 101.
[16]. W. Schmickler, Interfacial Electrochemistry, OUP, Oxford, 1996.
[17]. R. Winand, Electrochim. Acta, 43 (1998) 2925.
[18]. H. Fischer, Electrodepos. Surf. Treat., 1 (3) (1973) 239.
[19]. F. Ebrahimi, Z. Ahmed, J. Appl. Electrochem., 33 (2003) 733.
[20]. K.L. Morgan, Z. Ahmed, F. Ebrahimi, Mat. Res. Soc. Symp. 634 (2001) Materials Research Society.
[21]. A.A. Rasmussen, P. Møller, M.A.J. Somers, Surf. Coat. Tech., 200 (2006) 6037.
[22]. Á. Cziráki, B. Fogarassy, I. Gerőcs, E. Tóth-Kádár, I. Bakony, J. Mater. Sci., 29 (1994) 4771.
[23]. I. Bakony, E. Tóth-Kádár, T. Tarnóczi, L.K. Varga, Á. Cziráki, I. Gerőcs, B. Fogarassy, Nonstr. Mater., 3 (1993) 155.
[24]. R. L. Zeller III, U. Landau, J. Electrochem. Soc., 137 (1990) 1107.
[25]. J. H. C. Cooper, D. B. Dreisinger and E. Peters, J. Appl. Electrochem., 25 (1995) 642.
[26]. C. Q. Cui, J. Y. Lee, Electrochim. Acta, 40 (1995) 1953.
[27]. V.S. Abdulin, V.I. Chernenko, Prot. Met. 18 (6) (1982) 777, (English translation of Zaschita Metallov).
[28]. R. Oriňáková, L. Trnková, M. Gálová, M. Šupicová, Electrochim. Acta, 49 (2004) 3587.
[29]. M. Šupicová, R. Rozik, L. Trnková, R. Oriňáková, M. Gálová, J. Solid State Electrochem., 10 (2006) 61.
[30]. J.O.M. Bockris, D. Drazic, A.R. Despic, Electrochim. Acta, 4 (1961) 325.
[31]. W.G. Proud, C. Müller, Electrochim. Acta, 38 (1993) 405.
[32]. I. Epelboin, M. Joussellin, R. Wiart, J. Electroanal. Chem., 119 (1981) 61.
[33]. E. Chassaing, M. Joussellin, R. Wiart, J. Electroanal. Chem., 157 (1983) 75.
Published
2009-05-15
How to Cite
1.
POROCH–SERIŢAN M, GUTT G, BOBU M, SEVERIN T, STROE S, MIHOC C. Influence of Technological Parameters on the Evolution of Nickel Films Deposited by Electrolysis. The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science [Internet]. 15May2009 [cited 12Sep.2024];32(1):177-83. Available from: https://www.gup.ugal.ro/ugaljournals/index.php/mms/article/view/3092
Issue
Section
Articles
