Mechanical Resistance on Cold Welding Achievement between Cogged Surfaces
Abstract
Cold welding on cogged surfaces is a technology developed by researchers from Robotics and Welding Department, Dunarea de Jos University of Galati. Easily deformable samples, having plane surfaces, are pressed on cogged surfaces of harder samples. The paper presents several experimental results regarding mechanical resistance on cold welding achievement. Welded joints between aluminum and copper, brass, carbon steel, stainless steel have been obtained. The maximum mechanical strength is obtained at the deformation rates 20...30%, value obviously much lower that the one characterizing the usual cold welding (minimum 70%). While the tensile strength of the joint is low (around 10% of the tensile strength of the parent metal), the shearing strength is much relevant.
References
[2]. Georgescu, B., Iordachescu, M., Georgescu, V., 2005, Several aspects concerning cold welding of cogged parts. The Annals of “Dunarea de Jos” University of Galati, Fascicle XII, Year XVI, ISSN 1221-4639, p. 5-12.
[3]. Georgescu, B., Constantin, E., Georgescu, V., 2005, Gradul minim de deformare necesar sudarii la rece pe suprafete zimtate. Revista Asociatiei de Sudura din Romania “SUDURA”, ISSN 1453-0384, nr. 3, p. 23-26.
[4]. Georgescu, B., 2006, Sudarea prin presiune la rece intre suprafete zimtate (Pressure cold welding on cogged surfaces), Teza de Doctorat, Universitatea Dunarea de Jos din Galati.
[5]. Georgescu, B., 2006, Sudarea prin presare la rece pe suprafete zimtate, Cerere de brevet de inventie nr. 2006 00639 / 10.08.2006.
[6]. Georgescu, B., 2007, Sudarea prin presiune la rece pe suprafete zimtate, Editura EUROPLUS Galati, ISBN (10) 973-7845-49-8, ISBN (13) 978-973-7845-49-8.
[7]. Georgescu, B., Georgescu, V., 2007, Study of stresses and strains during cold welding on cogged surfaces – Studiul tensiunilor si deformatiilor din timpul sudarii la rece pe suprafete zimtate, Revista Asociatiei de Sudura din Romania “SUDURA”, ISSN 1453-0384, nr. 2, p. 4-10.
[8]. Georgescu, V., Iordachescu, M., Georgescu, B., 2001, Practica sudarii prin presiune la rece, Editura Tehnica Bucuresti, ISBN 973-31-1558-4.
