CFD Modeling and Simulation of an Industrial Hall

  • Florin-Bogdan MARIN "Dunarea de Jos" University of Galati, Romania
  • Mihaela MARIN "Dunarea de Jos" University of Galati, Romania
Keywords: CFD, modeling, simulation, industrial hall

Abstract

The subject of this research is the use of artificial vision techniques to optimize the placement of hot air sources depending on the location of certain equipment in industrial halls operating at low temperatures. Low temperature industrial halls require optimization of the location of hot air sources to achieve low consumption and efficient heating, taking into account the fact that workplace safety standards require the halls are high and at a certain area of windows (to ensure a hall for this reason, it is necessary to optimize the location and hot air sources flow to ensure the heating of these halls.

Creative Commons License

Downloads

Download data is not yet available.

References

[1]. Tanasic N., Jankes G., Skistad H., CFD analysis and airflow measurements to approach large industrial halls energy efficiency: A case study of a cardboard mill hall, Energy and Buildings, vol. 43, issue 6, p. 1200-1206, 2011.
[2]. Fujii K., Progress and future prospects of CFD in aerospace-Wind tunnel and beyond, Progress in Aerospace Sciences, vol. 41, issue 6, p. 455-470, ISSN 0376-0421, 2005.
[3]. Xia H., Tucker P. G., Dawes W. N., Level sets for CFD in aerospace engineering, Progress in Aerospace Sciences, vol. 46, issue 7, p. 274-283, ISSN 0376-0421, 2010.
[4]. Wang C., Li F., Ding Z., Zhang L., Numerical Simulation of Hypersonic Flow Around an Aerospace Plane by Parallel RANS based CFD, Procedia Engineering, vol. 61, p. 23-27, ISSN 1877-7058, 2013.
[5]. Danca P., Bode F., Nastase I., Meslem A., On the Possibility of CFD Modeling of the Indoor Environment in a Vehicle, Energy Procedia, vol. 112, p. 656-663, 2017.
[6]. Gosman A. D., Developments in CFD for industrial and environmental applications in wind engineering, Journal of Wind Engineering and Industrial Aerodynamics, vol. 81, Issues 1-3, p. 21-39, ISSN 0167-6105, 1999.
[7]. Kohler H., Liebmann V., Golla C., Frohlich J., Rudiger F., Modeling and CFD-simulation of cleaning process for adhesively detaching film-like soils with respect to industrial application, Food and Bioproducts Processing, vol. 129, p. 157-167, ISSN 0960-3085, 2021.
[8]. Ghaffari M., Hoffmann A., Skjold T., Rolf K., Eckhoff K., Wingerden, A brief review on the effect of particle size on the laminar burning velocity of flammable dust: Application in a CFD tool for industrial applications, Journal of Loss Prevention in the Process Industries, vol. 62, 103929, ISSN 0950-4230, 2019.
[9]. Aksenov A. A., Kharchenko S. A., Konshin V. N., Pokhilko V. I., FlowVision software: Numerical simulation of industrial CFD applications on parallel computer systems, Parallel Computational Fluid Dynamics, p. 401-408, ISBN 9780444516121, 2003.
[10]. Pavan K. Sharma, Modeling of fire with CFD for nuclear power plants (NPPs), Advances of Computational Fluid Dynamics in Nuclear Reactor Design and Safety Assessment, p. 663-727, 2019.
[11]. Berni F., Cicalese G., Borghi M., Fontanesi S., Towards grid-independent 3D-CFD wall-function-based heat transfer models for complex industrial flows with focus on in-cylinder simulations, Applied Thermal Engineering, vol. 190, 116838, ISSN 1359-4311, 2021.
[12]. Tutar M., Ustun C., Campillo-Robles J. M., Fuente R., Cibrian S., Arzua I., Fernandez A., Lopez G., Optimized CFD modelling and validation of radiation section of an industrial top-fired steam methane reforming furnace, Computers & Chemical Engineering, vol. 155, 107504, ISSN 0098-1354, 2021.
[13]. Rizzi A., Jluckring J. M., Historical development and use of CFD for separated flow simulations relevant to military aircraft, Aerospace Science and Technology, vol. 117, 106940, ISSN 1270-9638, 2021.
[14]. Wang M., Wang Y., Tian W., Qiu S., Su G. H., Recent progress of CFD applications in PWR thermal hydraulics study and future directions, Annals of Nuclear Energy, vol. 150, 107836, ISSN 0306-4549, 2021.
[15]. Seshaiah T., Vasu B., Vijaya K., Reddy K., Bridjesh P., Analysis on aircraft winglet at different angles by using CFD simulation, Materials Today: Proceedings, ISSN 2214-7853, 2021.
[16]. Garcia-Ribeiro D., Flores-Mezarina J. A., Bravo-Mosquera P. D., Cerón-Muñoz H. D., Parametric CFD analysis of the taper ratio effects of a winglet on the performance of a Horizontal Axis Wind Turbine, Sustainable Energy Technologies and Assessments, vol. 47, 101489, ISSN 2213-1388, 2021.
[17]. Zhu X, Dai Y., Ma F., CFD modelling and numerical simulation on windage power loss of aeronautic high-speed spiral bevel gears, Simulation Modelling Practice and Theory, vol. 103, 102080, ISSN 1569-190X, 2020.
[18]. Zobaer T., Sutradhar A., Modeling the effect of tumor compression on airflow dynamics in trachea using contact simulation and CFD analysis, Computers in Biology and Medicine, vol. 135, 104574, ISSN 0010-4825, 2021.
[19]. Perinajov R., Juffermans J., Westenberg J. M., Roel L.F., Palen Pieter J. Boogaard, Hildo J. Lamb, Sas a Kenjeres, Geometrically induced wall shear stress variability in CFD-MRI coupled simulations of blood flow in the thoracic aortas, Computers in Biology and Medicine, vol. 133, 104385, ISSN 0010-4825, 2021.
[20]. Shoeibi S., Kargarsharifabad H., Rahbar N., Ahmadi G., Reza M. S., Performance evaluation of a solar still using hybrid nanofluid glass cooling-CFD simulation and environmental analysis, Sustainable Energy Technologies and Assessments, vol. 49, 101728, ISSN 2213-1388, 2022.
[21]. Norton T., Sun D., Computational fluid dynamics (CFD) – an effective and efficient design and analysis tool for the food industry: A review, Trends in Food Science & Technology, vol. 17, Issue 11, p. 600-620, 2006.
[22]. Wutz J., Waterkotte B., Heitmann K., Wucherpfennig T., Computational fluid dynamics (CFD) as a tool for industrial UF/DF tank optimization, Biochemical Engineering Journal, vol. 160, 107617, ISSN 1369-703X, 2020.
[23]. Silvestri L., CFD modeling in Industry 4.0: New perspectives for smart factories, Procedia Computer Science, vol. 180, p. 381-387, ISSN 1877-0509, 2021.
[24]. Lim J., Ooka R., A CFD-Based Optimization of Building Configuration for Urban Ventilation Potential, Energies, 14, 1447, 2021.
[25]. Souza C., Kurka P., Lins R., Araujo J., Performance comparison of non-adaptive and adaptive optimization algorithms for artificial neural network training applied to damage diagnosis in civil structures, Applied Soft Computing, vol. 104, 107254, ISSN 1568-4946, 2021.
[26]. Volker D., Lindner M., Weigold M., Design Method for Building Automation Control Programs to Enable the Energetic Optimization of Industrial Supply Systems, Procedia CIRP, vol. 104, p. 229-234, ISSN 2212-8271, 2021.
[27]. Si B., Wang J., Yao X., Shi X., Jin X., Zhou X., Multi-objective optimization design of a complex building based on an artificial neural network and performance evaluation of algorithms, Advanced Engineering Informatics, vol. 40, p. 93-109, ISSN 1474-0346, 2019.
[28]. Iijima F., Ikeda S., Nagai T., Automated computational design method for energy systems in buildings using capacity and operation optimization, Applied Energy, vol. 306, Part A, 117973, ISSN 0306-2619, 2022.
Published
2021-12-15
How to Cite
1.
MARIN F-B, MARIN M. CFD Modeling and Simulation of an Industrial Hall. The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science [Internet]. 15Dec.2021 [cited 29Mar.2024];44(4):86-0. Available from: https://www.gup.ugal.ro/ugaljournals/index.php/mms/article/view/4983
Section
Articles

Most read articles by the same author(s)

1 2 > >>