Some Aspects Regarding the Action of Vibrations on the Human Knee Joint
Abstract
Machines that use vibrations in the work process are found in various activities, on construction sites or within the premises of some constructions. Their operators are affected over time by mechanical oscillations. Entering the body through the hand-arm assembly, through the legs, or while sitting, the vibrations affect the human body, usually in a negative way. The positive effects are currently being studied in order to be able to improve various human joint conditions or to improve physical condition, but exposure must be done in a controlled environment and under well-established conditions defined by specialists.
Over time, various studies have been carried out and solutions have been sought to reduce the effects of vibrations on the human body. The difficulty of performing in vivo experiments on people has led to the use of increasingly complex theoretical models to study the problem. By comparing the results obtained from modeling with experimental results collected through measurements under different conditions on the construction site or in the laboratory, useful information was obtained, which can be used to improve the working conditions of workers.
The search for a theoretical model as efficient as possible, and for methods as fast as possible to obtain information about the vibrations that affect the human body, is ongoing, the human body being very complex and difficult to model.
This article investigates the effect of mechanical oscillations on the knee joint of rotary hammer operators, comparing results obtained through laboratory measurements with those obtained from modeling.
Downloads
References
[2]. Stănescu (Dogaru) M. G., Biomechanical modeling of human body joints under the action of mechanical vibrations, Doctoral thesis, U.T.C.B., Bucharest, 2022.
[3]. Moşneguţu V., Contributions on the dynamics of friction systems with applications in vibration control and damping, Doctoral thesis, Bucharest, 2008.
[4]. Moşneguţu V., Chiroiu V., Introduction to mathematical modeling of the knee joint, Romanian Academy Publishing House, Bucharest, 2013.
[5]. Cezar Th. Niculescu, et al., Human Anatomy and Physiology. Compendium, Corint Educational Publishing house, ISBN 978-606-8609-07-2, 2014.
[6]. Anne E. Martin, Dario J. Villarreal, Robert D. Gregg, Characterizing and modeling the joint-level variability in human walking, Journal of Biomechanics, 49, p. 3298-3305, 2016.
[7]. Akio Yamamoto, et al., Behavioral effect of knee joint motion on body’s center of mass during human quiet standing, Gait & Posture, 41, p. 291-294, 2015.
[8]. Hyunggwi Song, Heewon Park, Sukyung Park, Springy pendulum could describe the swing leg kinetics of human walking, Journal of Biomechanics, 49, p. 1504-1509, 2016.
[9]. Raj Desai Anirban, Guha P. Seshu, Multibody Biomechanical Modelling of Human Body Response to Direct and Cross Axis Vibration, Procedia Computer Science, vol. 133, p. 494-501, version of Record 20 July 2018.
[10]. Chadefaux D., et al., Development of a two-dimensional dynamic model of the foot-ankle system exposed to vibration, Journal of Biomechanics, vol. 99, 109547, 23 January 2020.
[11]. Pavel C., Constantinescu A., Mechanical vibrations, Matrix Rom Publishing house, Bucharest, ISBN 978-973-755-468-0, 2009.
[12]. Stefan Seiterle, et al., Interlimb coordination in body-weight supported locomotion: A pilot study, Journal of Biomechanics, 48, p. 2837-2843, 2015.
[13]. ***, https://www.bricodepot.ro/unelte/unelte-electrice/bormaina-cu-percu-ie-skil-900-w-cu-doua-viteze.html.
[14]. Fabian van de Bunt, et al., A novel physiological testing device to study knee biomechanics in vitro, The Knee, 24, p. 718-725, 2017.
[15]. Toader D., Dogaru M., Ursache R., Bauşic F., Partial experimental contributions on the validation of biomechanical models of the human body subjected to the action of mechanical vibrations, Modeling in Civil and Environmental Engineering Magazine, vol. 16, no. 4, p. 25-33, ISSN 2784-1391, 2021.
[16]. Julia K. Nicholsa, Oliver M. O’Reilly, Verifying the equivalence of representations of the knee joint moment vector from a drop vertical jump task. The Knee, 24, p. 484-490, 2017.
[17]. Johal P., et al., Tibio-femoral movement in the living knee. A study of weight bearing and non-weight bearing knee kinematics using ‘interventional’ MRI, J Biomech, 38, p. 269-76, 2005.
[18]. Panaitescu-Liess R., Legendi A., Pavel C., Analysis of a mechanical system’s dynamic properties by vibrations measurements, 34rd National Conference on Mechanics of Solids, Analele Universităţii “Eftimie Murgu”, Resiţa, anul XVII, no. 1, ISSN 1453-7397, p. 39-44, Reșița, 16th-18th September 2010.
[19]. Panaitescu-Liess R., Pavel C., Analysis of dynamic response of the human body as a system with several degrees of freedom from external harmonic perturbations, RJAV, vol. X, issue 2, ISSN 1584-7284, 2013.
[20]. ***, Mechanical Systems and Signal Processing, vol. 167, Part A, 2021.
[21]. ***, Human vibrations, Brüel & Kjaer Sound and Vibrations Measurement, 2003.
[22]. ***, Directive 2002/44/EC of the European Parliament and of the Council of 25 June 2002 on the minimum health and safety requirements regarding the exposure of workers to the risks arising from physical agents (vibration) (sixteenth individual Directive
within the meaning of Article 16(1) of Directive 89/391/EEC), Official Journal of the European Union 05/Vol.
[23]. ***, Decision no. 589 of 12.05.2016 on the minimum requirements for occupational health and safety regarding the exposure of workers to risks generated by mechanical vibrations, Published: 20.05.2016 in the Official Gazette no. 134-139 art. no. 647 Date of entry into force: 01.01.2017 Pursuant to article 6 of the Law on Occupational Health and Safety no. 18.