INFLUENCE OF DAMPING SYSTEMS ON METALLIC STRUCURE
Abstract
The seismic movement will be simulated with the help of an electric motor that will transmit the oscillatory movements through a bi-crank system to the two structures which are located on the supporting plate. By varying the oscillation frequency deformations of the metallic structures are obtained, resonance can be viewed deformations of structure without shock absorbers, while the structure with shock absorbers has negligible deformations. it results that the largest x-axis deformations during forced vibration occur in the upper plate (0.0013061 m). The structure legs have the highest x-axis deformations in the upper area (0.0013061 m), the values decreasing to the base where the deformation is 0.00014512 m, this being the minimum deformation on the x-axis. The maximum 1.3 mm can be visualized and, therefore, those who participate in the laboratory work can appreciate what is happening with the structure with the shock absorbers during the vibrations produced by an earthquake
All rights are reserved for this publication, which is copyright according to the Romanian law of copyright. Excepting only any fair dealing for the purpose of the private study, research, review, comment and criticism, no part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means, mechanical, electrical, electronic, optical, photocopying, recording or otherwise, without the prior express permission of the copyright owners.