WEAR BEHAVIOUR OF POLYPHENYLENE SULPHIDE COMPOSITES DURING DRY SLIDING TESTS

  • Aida Besnea “Dunarea de Jos” University of Galati
  • Dan Trufasu “Dunarea de Jos” University of Galati
  • Gabriel Andrei “Dunarea de Jos” University of Galati
  • Lorena Deleanu “Dunarea de Jos” University of Galati
Keywords: Wear, friction, composite, polyphenylene sulphide, glass fibers, carbon fibers, graphite, pin-on-disk

Abstract

Two polyphenylene sulphide matrix-based composites were investigated: PPS GF 40 (PPS -polyphenylene sulphide +40% glass fibers) and PPS PVX (PPS - polyphenylene sulphide +10% PTFE+10% carbon fibers +10% graphite). The tribological properties of these composites were tested on a Universal Tribometer UMT-2 (CETR) apparatus (pin-on-disc test, in dry sliding, with the help of a pin-on-disk tribotester. The tribological behaviour was found to depend on the adding material(s) in the tested composites and better results were obtained for the composite containing solid lubricants (PTFE and graphite).

Published
2012-06-13
How to Cite
Besnea, A., Trufasu, D., Andrei, G., & Deleanu, L. (2012). WEAR BEHAVIOUR OF POLYPHENYLENE SULPHIDE COMPOSITES DURING DRY SLIDING TESTS. Mechanical Testing and Diagnosis, 2(2), 15-20. Retrieved from https://www.gup.ugal.ro/ugaljournals/index.php/mtd/article/view/2479
Issue
Vol 2 No 2 (2012)
Section
Articles

All rights are reserved for this publication, which is copyright according to the Romanian law of copyright. Excepting only any fair dealing for the purpose of the private study, research, review, comment and criticism, no part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means, mechanical, electrical, electronic, optical, photocopying, recording or otherwise, without the prior express permission of the copyright owners.

Most read articles by the same author(s)

Obs.: This plugin requires at least one statistics/report plugin to be enabled. If your statistics plugins provide more than one metric then please also select a main metric on the admin's site settings page and/or on the journal manager's settings pages.