The Different Practical Application of Niobium Carbide Coatings Elaborated by CVD Process
Abstract
In this paper, the different application of niobium carbide coatings onto hard carbide substrate was investigated using scanning electron microscope (SEM), Xray diffractometer (XRD) and micro-hardness. The paper conducted a study on the friction coefficient and wear resistance as a function of load friction couple, for a series of NbC type thin layers; micro-hardness value measured in the coating layer was 29.800 MPa.
Scanning Electron Microscope was used to investigate the coating morphology and interface structure. X-ray mapping was also performed to characterise the elements in a semi-quantitative analysis. A Dron X-ray diffractometer with Mo Kα radiation operating was used for phase(s) identification. Adherence was assessed using a layer fingerprinting method using Rockwell hardness testers. CVD NbC coatings usually show only moderate or even poor corrosion protection for hard carbide substrates.
Downloads
References
[2]. Constantinescu S., Nitride coatings on widia substrate for mechanical applications, Journal Surface Engineering, vol. 1, p. 77-81, 2009.
[3]. Constantinescu S., Radu T., Advanced methods of obtaining thin coats, Ed. Ştiinţifică F.M.R., Bucureşti, 2003.
[4]. Yasuharu O., Shinya K., Kazuhide O., Hideki A., Hideki N., Kenji H., Osamu M., Thin Solid Films 497, 2006.
[5]. Sista V., Kahvecioglu O., Erylmaz O. L., Erdemir A., Timur S., Thin Solid Films, 520, 1582, 2011.
[6]. Bemporad E., Sebastiani M., Pecchio C., De Rossi S., High thickness Ti/TiC multilayer thin coatings for wear resistant applications, Surface and Coatings Technology, vol. 201, issue 6, p. 2155-2165, 2006.
[7]. Staia M. H., Perez-Delgado Y., Sanchez C., Castro A., Le Bourhis E., Puchi-Cabrera E. S., Wear, 267, 1452, 2009.
[8]. Yasuda Y., Kano M., Mabuchi Y., Abou S., Research on Diamond-like Carbon Coatings for Low-friction Valve, Lifters, Special Publications. Society of Automobile Engineers SP-1744, p. 77-82, 2003.
[9]. Polcar T., Evaristo M., Cavaleiro A., Wear, 266, p. 388, 2009.
[10]. Zhecheva A., Sha W., Malinov S., Long A., Enhancing the microstructure and properties of titanium alloys through nitriding and other surface engineering methods, Surface and Coatings Technology, vol. 200, issue 7, p. 2192-2207, 2005.
[11]. Choy K. L., Chemical vapour deposition of coatings, Progress in Materials Science, 48, p. 57-170, 2003.
[12]. Bemporad E., Sebastiani M., Pecchio C., De Rossi S., High thickness Ti/TiC multilayer thin coatings for wear resistant applications, Surface and Coatings Technology, vol. 201, issue 6, p. 2155-2165, 2006.
[13]. Caicedo J. C., Amaya C., Yate L., Nos O., Gomez M. E., Prieto P., Hard coating performance enhancement by using [Ti/TiN]n, [Zr/ZrN]n and [TiN/ZrN]n multilayer system, Mater. Sci. Eng. B, vol. 171, p. 56-61, 2010.
[14]. Yasuharu O., Shinya K., Kazuhide O., Hideki A., Hideki N., Kenji H., Osamu M., Thin Solid Films, 497, 218, 2006.
[15]. Notter I. M., Gabe D. R., Porosity of Electrodeposited Coatings: Its Cause, Nature, Effect and Management, Corrosion Reviews, 10 (3-4), p. 217-280, 1992.
[16]. Munemasa J., Kumakiri T., Effect of the Surface Roughness of Substrate on the corrosion properties of fims coated by Physical Vapour Deposition, Surface and CoatingsTechnology, 49, p. 496-499, 1991.
[17]. Krawitz A. D., Introduction to Diffraction in Materials Science and Engineering, Wiley, New York, p. 165-167, 2001.
[18]. Krawitz A. D., Introduction to Diffraction in Materials Science and Engineering, Wiley, New York, p. 165-167, 2001.
[19]. Man A., Aubert P., Mercier F., Khodja H., Berthier C., Houdy P., Surf. Coat. Technol., 194, p. 190-195, 2005.
[20]. Sista V., Kahvecioglu O., Erylmaz O. L., Erdemir A., Timur S., Thin Solid Films, 520, 1582, 2011.