Research on the Effect of Temperature and Duration of Immersion on the Layer Thickness of Zinc Coating Obtained in Microalloyed Zinc Melts

  • Tamara RADU "Dunarea de Jos" University of Galati, Romania
  • Lucica BALINT "Dunarea de Jos" University of Galati, Romania
  • Viorel DRAGAN "Dunarea de Jos" University of Galati, Romania
Keywords: duration of immersion, layer thickness, microalloyed zinc

Abstract

This paper aims to establish the influence of temperature and duration of immersion on the thickness of zinc layer deposited through a thermal process, in correlation with the chemical composition of melted zinc. Layers obtained in microalloyed zinc with nickel, bismuth, tin, lead, aluminium, at different times of immersion and temperature, are analyzed. In terms of layer thickness, melted zinc microalloyed with bismuth and / or lead to coating to increase the content in these elements has  thicknesses of increasingly small effect given the increasing fluidity of the melt in their presence. Decreased thickness of the layer is enhanced by increasing temperature and decreasing the duration of immersion. Best results are obtained at a temperature of 460 oC and 5 seconds of immersion time.

Creative Commons License

Downloads

Download data is not yet available.

References

[1]. Radu T. Constantinescu S. Balint L. Materiale metalice rezistente la coroziune, Ed. IFR. Buc. 2004.
[2]. John Zervoudis, Graeme Anderson, A Review of Bath Alloy Additives and their Impact on the Quality of the Galvanized Coating, p. 4, Teck Cominco Metals Ltd. 120 est, Suite 1500 Toronto, Ontario, Canada.
[3]. Bo Zhang, Development of Corrosion Resistant Galvanising Alloys, Metallurgy and Materials School of Engineering The University of Birmingham, July 2005.
[4]. Tamara Radu, Vlad Maria, Mitoseriu Olga, Prevention and reduction of wastes in the hot dip galvanizing steel sheet, conf int. Technology and Quality for Sustained Development TQSD 2008 Buc. P. 59 - 64, ISSN 1844 – 9159, AGIR Publisher HOUSE, Editors Univ. Polith. Bucharest.
[5]. Lucica Balint, Tamara Radu, Conferinţa Internaţională Transfrontalieră: Integrated monitoring of environmental media (air, water, soil) in the Lower Danube Euro region, Galati-Cahul area, Galati, 19 noiembrie 2009, Editura Fundatiei universitare „Dunarea de Jos” Galati, ISBN 978-973-627-455-8 p. 218-222.
Published
2010-09-15
How to Cite
1.
RADU T, BALINT L, DRAGAN V. Research on the Effect of Temperature and Duration of Immersion on the Layer Thickness of Zinc Coating Obtained in Microalloyed Zinc Melts. The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science [Internet]. 15Sep.2010 [cited 8Oct.2024];33(3):62-5. Available from: https://www.gup.ugal.ro/ugaljournals/index.php/mms/article/view/2993
Section
Articles