Characterisation of Niobium Carbide Coating Obtained by Chemical Vapour Deposition
Abstract
The experiments conducted to obtain thin layer of carbide by the vapour chemical deposition method have followed an original path to make NbC directly in the working room thus avoiding the import of these hazardous substances. The NbCl4 vapoursare obtained in a heat treatment chamber by adding chloride acid vapours passed over the incandescent ferro-niobium.
Characterisation of coating deposed by CVD method was done using scanning electron microscopy (SEM), X-ray diffraction (XRD) and microhardness measurements. The thickness of the NbC layer was determined using an optical microscope and the Kalotest device. The thickness of the CVD deposit layer increases with the time of exposure to the working temperature. The values of the NbC thin layers measured by the Kalotest device are in good agreement with the values measured by microscopic analysis but slightly lower. SEM measurements were used to investigate the coating morphology and interface structure. X-ray mapping was also performed to identify the chemical elements in a semi-quantitative analysis. Dron X-ray diffractometer with Mo Kα radiation operating was used for phase(s) identification.
References
[2]. S. Constantinescu, L. Orac - Materials properties and control methods, Ed. Europlus, ISBN 978-973-1950-01-3, Galati, 2007.
[3]. S. Constantinescu, T. Radu - Advanced methods of obtaining thin coats, Ed.Ştiinţifică F.M.R. ISBN 973-8151-25-2 Bucureşti, 2003.
[4]. A.Y. Cho, J.R. Arthur -Progress in Solid State Chemistry, Ed. Pergamon Presa, New York vol. 10, 1995, p. 157-164.
[5]. C. Ciocardia et all - Hard alloys sintered from metallic carbides., Bucharest, Technical House, 1984, p.103-112.
[6]. S. Constantinescu - Studies on Thin Carbide and Nitride Layers Deposition on Metal Basis, Based on Chemical Reaction at High Temperatures, Academic Thesis, Galati, 1998.
[7]. ***, Bimetallic corrosion, Guides to good practice in corrosion control, www.npl.co.uk.
[8]. A. Tomescu, M. Constantinescu - Chemistry and corrosion, Didact. and Pedag. Publishing House Bucharest, Romania, 1985.
[9]. C.E. Morosanu, V Solluz - Thin Solid Films 52, 1978, p.181-190.
[10]. T. O. Sedgwick, H. Lydtin - Eds, CVD, Seventh International Conference, The Electrochem. Soc., Inc., Princeton, New York.
