Radial Forging Machine. Technology for Axle Type Parts
Keywords:
hot plastic deformation, radial forging, axle type parts
Abstract
This paper presents three types of radial forging machines to produce the axle type pieces. The new types of radial forging machines are presented cinematically. The movement of the deformation tools at these types of machines is compared with the motion at the existing machines.
References
[1]. Popescu V., Drăgan I., Alexandru T. - Tehnologia forjării Ed. Tehnică Bucureşti, (1982).
[2]. Tălpăşeanu N. - Tehnologia Materialelor Editura Tehnică, Bucureşti, (1967).
[3]. Vlădescu M., Ancuţ R., Scorţea C. – Îndrumar Metalurgic, Editura Tehnică, (1988).
[4]. Hosford W. F., Caddell R. M. - Metal Forming: Mechanics and Metallurgy, Cambridge University Press, 3rd edition, (2007).
[5]. Domblesky J. P., Shivpuri R. - Painter B. - Application of finite-element method to the radial forging of large diameter tubes, J.M.P.T., vol. 49, (1995), p. 57-74.
[6]. Kurtaran H. - Dissertation, design optimization of structures under impact loading with approximation methods, George Washington University, Washington, DC, USA, (2001).
[2]. Tălpăşeanu N. - Tehnologia Materialelor Editura Tehnică, Bucureşti, (1967).
[3]. Vlădescu M., Ancuţ R., Scorţea C. – Îndrumar Metalurgic, Editura Tehnică, (1988).
[4]. Hosford W. F., Caddell R. M. - Metal Forming: Mechanics and Metallurgy, Cambridge University Press, 3rd edition, (2007).
[5]. Domblesky J. P., Shivpuri R. - Painter B. - Application of finite-element method to the radial forging of large diameter tubes, J.M.P.T., vol. 49, (1995), p. 57-74.
[6]. Kurtaran H. - Dissertation, design optimization of structures under impact loading with approximation methods, George Washington University, Washington, DC, USA, (2001).
Published
2013-12-15
How to Cite
1.
HANGANU D, NEACSU M. Radial Forging Machine. Technology for Axle Type Parts. The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science [Internet]. 15Dec.2013 [cited 28Apr.2024];36(4):84-9. Available from: https://www.gup.ugal.ro/ugaljournals/index.php/mms/article/view/2666
Issue
Section
Articles
