Premises in the Design of Computational Algorithms for Refining Slags Applied in Ladle Treatment of Steels. Influence of BOF Slag and of Other Sources of Slag
Abstract
In the design of computational algorithms for refining slags for ladle treatment of steels, the evaluation of contributions of different factors is a definitory step, allowing to evaluate the real posibilities and limitations in steel refining practice. Slag carried over from steelmaking converters to the ladle is evaluated from the point of view of contributions of its amount and contents of SiO2 and iron oxides. It is shown in quantitative manner what it happens in conditions of variations of the above mentioned factors, in the ranges of values closed to real industrial practice. It is shown and concluded that quantitative evaluations of the contributions of slag carried over in refining ladle are of outmost importance. It is possible, under the above mentioned conditions, to ensure adequate values of sulphide capacity, low residual values of iron oxides in economical conditions and to save aluminium from the exaggerate loss by oxidation.
References
[2]. Das B, Prakash S., Reddy P.S.R. and Misra V.N. - Ressources, Conservation and Recycling 50 no.1 (2007):40-57.
[3]. Shi Caijun - Journal of Materials in Civil Engineering16, no.3, (2004):230-236.
[4]. Poh, D. and Ghataora, G.S. and Gazireh, N. - Journal of Materials in Civil Engineering 18 no.2 (2006):229-240.
[5]. Tossavainen M., Engstrom F., Yang Q., Menad N., Larson M.L. and Bjorkman J - Waste Management 27 no.10 (2007): 39-48.
[6]. Mahieux P.Y., aubert J.E. and Escadeillas, G. - Construction and Building Materials 23 no.2 (2009): 742-747.
[7]. Valigora J., Bulteel D., Degrugilliers P., Damidot D., Potdevin J.L.and Messon M - Materials Characterization 61 no.1 (2010): 39-48.
[8]. Nita, P. S., I. Butnariu, and N. Constantin - Revista de metalurgia 46, no. 1 (2010): 5-14.
