Research on the Production of Sintered Powder 316
Keywords:
powder metallurgy, 316 stainless steel, abrasive wear
Abstract
The 316 austenitic stainless steel powders are typically used in applications requiring good corrosion resistance, mechanical strength at high and very low temperatures, good ductility, wear resistance, associated in some cases with adequate porosity. The paper presents some experimental research on the production of sintered 316 stainless steel powders and their characterization in terms of microstructure and wear resistance.
Downloads
Download data is not yet available.
References
[1]. H. N. Ch'ng, J. Pan - Modelling microstructural evolution of porous polycrystalline materials and a numerical study of anisotropic sintering, J. Comput. Phys. 204, 430–461, Journal of Computational Physics, Volume 204, Issue 2, 20, (2005).
[2]. D. Bernard, D. Gendron, J. M. Heintz, S. Bordere, J. Etourneau, First direct 3D visualisation of microstructural evolutions during sintering through X-ray computed microtomography, Acta Materialia 53, (2005).
[3]. Y. V. Levinsky - The Behavior of Closed Pores at the Final Stage of Sintering, ISSN 1067-8212, Russian Journal of NonFerrous Metals, Vol. 50, No. 3, pp. 298–316. © Allerton Press, Inc., (2009).
[4]. Deleanu L., Ciortan S. - Evaluating Tribological Damages by 3D profilometry, EHD Lubrication and Traction, May 6-8, 2010 VAREHD 15, Suceava, Romania, http://www.varehd.usv.ro/, ISSN 1844-8917, pp. 163-169, (2010).
[5]. E. Drugescu, O. Potecaşu, F. Potecaşu, M. Marin, V. Mereuta, L. Deleanu - Mechanical properties, abrasive wear behavior and surface quality evaluation of new sintered iron alloys, Rotrib, Universitatea Tehnică „Gh. Asachi“, Iaşi, Tomul LVII (LXI), Fasc. 1 (2011).
[6]. Deleanu L., Cantaragiu A., Ciortan S. - Surface Quality evaluated by 3D Functional Parameters, Proceedings of 10th Intern. Conf. “Research and Development in Mechanical Industry”, RaDMI 16-19 September, Donji Milanovac, Serbia, pp. 311-318, (2010).
[7]. Palfalvi -Metalurgia Pulberilor, Editura Tehnică, Bucureşti, (1988).
[8]. T. Surdeanu, M. Perneş - Piese sinterizate din pulberi metalice, Editura Tehnică, Bucureşti, (1984).
[9]. Marshall D. - Austenitic Stainless Steels. Microstructure and mechanical properties, (1984).
[10]. ***, ASM Specialty Handbook, Stainless Steels, (2004).
[2]. D. Bernard, D. Gendron, J. M. Heintz, S. Bordere, J. Etourneau, First direct 3D visualisation of microstructural evolutions during sintering through X-ray computed microtomography, Acta Materialia 53, (2005).
[3]. Y. V. Levinsky - The Behavior of Closed Pores at the Final Stage of Sintering, ISSN 1067-8212, Russian Journal of NonFerrous Metals, Vol. 50, No. 3, pp. 298–316. © Allerton Press, Inc., (2009).
[4]. Deleanu L., Ciortan S. - Evaluating Tribological Damages by 3D profilometry, EHD Lubrication and Traction, May 6-8, 2010 VAREHD 15, Suceava, Romania, http://www.varehd.usv.ro/, ISSN 1844-8917, pp. 163-169, (2010).
[5]. E. Drugescu, O. Potecaşu, F. Potecaşu, M. Marin, V. Mereuta, L. Deleanu - Mechanical properties, abrasive wear behavior and surface quality evaluation of new sintered iron alloys, Rotrib, Universitatea Tehnică „Gh. Asachi“, Iaşi, Tomul LVII (LXI), Fasc. 1 (2011).
[6]. Deleanu L., Cantaragiu A., Ciortan S. - Surface Quality evaluated by 3D Functional Parameters, Proceedings of 10th Intern. Conf. “Research and Development in Mechanical Industry”, RaDMI 16-19 September, Donji Milanovac, Serbia, pp. 311-318, (2010).
[7]. Palfalvi -Metalurgia Pulberilor, Editura Tehnică, Bucureşti, (1988).
[8]. T. Surdeanu, M. Perneş - Piese sinterizate din pulberi metalice, Editura Tehnică, Bucureşti, (1984).
[9]. Marshall D. - Austenitic Stainless Steels. Microstructure and mechanical properties, (1984).
[10]. ***, ASM Specialty Handbook, Stainless Steels, (2004).
Published
2012-12-15
How to Cite
1.
BOICIUC S, POTECASU F. Research on the Production of Sintered Powder 316. The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science [Internet]. 15Dec.2012 [cited 8Oct.2024];35(4):33-0. Available from: https://www.gup.ugal.ro/ugaljournals/index.php/mms/article/view/2863
Issue
Section
Articles