Modification of Surface Properties by Laser Cladding with Ni–Cr–B–Fe–Al Alloy
Keywords:
laser cladding, microstructure, potentiodynamic method, sliding indentation
Abstract
The paper is focused on modification of surfaces properties by laser cladding. To follow the corrosion behavior in different media of laser cladding layers made of nickel based alloy Ni - Cr - B - Fe - Al. It was studied using the potentiodynamic method. Elasto – plastic behavior of the assembly base material - deposited layer was monitored by using sliding indentation, in dry friction conditions. It was determined the bearing capacity of surfaces.
References
[1]. M.F. Schneider - Laser cladding with powder, Ph. D. Thesis University of Twente, Enschede, Olanda, (1998), http://doc.utwente.nl/fid/1558.
[2]. H. Gedda – Laser surface cladding - a literature survey, Lulea University of Technology, Division of Materials Processing, iulie (2000), Suedia, http://epubl.luth.se/1402-1544/2004/41/.
[3]. Zhao Wei-Min, Yong Wang, Tao Han, Wu Kai-Yuan, Jin Xue - Electrochemical evaluation of corrosion resistance of NiCrBSi coatings deposited by HVOF, Surface & coatings technology, vol. 183, no 1, (2004), pp. 118-125.
[4]. Zhao Wei-Min, Yong Wang, Dong Li-Xian, Wu Kai-Yuan, Jin Xue - Corrosion mechanism of NiCrBSi coatings deposited by HVOF, Surface & coatings technology, vol. 190, no 2-3, pp. 293-298.
[5]. TsingHua - Electrochemical Corrosion Failure of NiCrBSi Welded Surfacing Coating, Materials Protection, 30 april, (2005).
[6] S. Levcovici, D.T. Levcovici, C. Gheorghieş, S. Boiciuc – Laser Cladding of Ni-Cr-B-Fe-Al Alloy on a Steel Support, The International Thermal Spray Conference and Exposition (ITSC), 15 – 17 mai, Seatle, USA (ISBN 0-87170-836-1).
[7]. Krageliskii I.V. – Trenie i iznos, MAŞGIZ, Moskova, (1962).
[8]. Popinceanu N, Gafiţanu C, Diaconescu E, Creţu S, Mocanu D.R. - Fundamental problems of rolling contact, Ed. Tehnică, Bucureşti, (1985).
[9]. Levcovici S. M. – Contributions to the laser surface treatment of tool steel, Doctoral thesis, Galaţi. (1997).
[10]. Z. Liu, J. Sun, W. Shen - Study of plowing and friction at the surfaces of plastic deformed metals, Tribology International 35 (2002) 511–522.
[11]. Crudu I – Contributions to the study of the influence of normal stress on static destruction by pitting of the point contacts, Doctoral thesis, Iaşi, (1969).
[2]. H. Gedda – Laser surface cladding - a literature survey, Lulea University of Technology, Division of Materials Processing, iulie (2000), Suedia, http://epubl.luth.se/1402-1544/2004/41/.
[3]. Zhao Wei-Min, Yong Wang, Tao Han, Wu Kai-Yuan, Jin Xue - Electrochemical evaluation of corrosion resistance of NiCrBSi coatings deposited by HVOF, Surface & coatings technology, vol. 183, no 1, (2004), pp. 118-125.
[4]. Zhao Wei-Min, Yong Wang, Dong Li-Xian, Wu Kai-Yuan, Jin Xue - Corrosion mechanism of NiCrBSi coatings deposited by HVOF, Surface & coatings technology, vol. 190, no 2-3, pp. 293-298.
[5]. TsingHua - Electrochemical Corrosion Failure of NiCrBSi Welded Surfacing Coating, Materials Protection, 30 april, (2005).
[6] S. Levcovici, D.T. Levcovici, C. Gheorghieş, S. Boiciuc – Laser Cladding of Ni-Cr-B-Fe-Al Alloy on a Steel Support, The International Thermal Spray Conference and Exposition (ITSC), 15 – 17 mai, Seatle, USA (ISBN 0-87170-836-1).
[7]. Krageliskii I.V. – Trenie i iznos, MAŞGIZ, Moskova, (1962).
[8]. Popinceanu N, Gafiţanu C, Diaconescu E, Creţu S, Mocanu D.R. - Fundamental problems of rolling contact, Ed. Tehnică, Bucureşti, (1985).
[9]. Levcovici S. M. – Contributions to the laser surface treatment of tool steel, Doctoral thesis, Galaţi. (1997).
[10]. Z. Liu, J. Sun, W. Shen - Study of plowing and friction at the surfaces of plastic deformed metals, Tribology International 35 (2002) 511–522.
[11]. Crudu I – Contributions to the study of the influence of normal stress on static destruction by pitting of the point contacts, Doctoral thesis, Iaşi, (1969).
Published
2012-09-15
How to Cite
1.
BOICIUC S, SPÂNU C. Modification of Surface Properties by Laser Cladding with Ni–Cr–B–Fe–Al Alloy. The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science [Internet]. 15Sep.2012 [cited 28Apr.2024];35(3):14-1. Available from: https://www.gup.ugal.ro/ugaljournals/index.php/mms/article/view/2875
Issue
Section
Articles
